CRKT

In the process of developing our line of Carson special forces G10 M16® models, it became apparent that there was a demand for these models from coalition forces serving in desert environments. These models have Desert Tan blade and scales.

The M16®-13DSFG Slim Profile G10 features a 3.50" (89 mm) dual grind Tanto blade and is ideal when weight and bulk must be kept to a minimum. It weighs only 4.0 ounces.

Just like it's black tactical counterpart, this knife shares a unique design offering a combination of Carson SF series features requested by military procurement specialists. It has a combined Razor-Sharp and patented (1) Veff™ Serrated edge. The open build allows two Carson Flippers to be incorporated, resulting in a true hilt— up to now rare in folding knives.

Blade and scales are non-reflective Desert Tan. Premium 8Cr14 stainless steel blades receive titanium nitride coating for maximum corrosion resistance. Kit's trademark dual checkered thumb studs are standard. One-hand opening and closing is quick and smooth. The open InterFrame build uses Desert Tan scales of G10, and stainless steel liners with friction grooves. G10 is often preferred for its aggressive gripping texture, light weight, and the insulating properties which make it cooler in heat and warmer in cold than metal.

The M16-13DSFG features our exclusive patented (2)AutoLAWKS™, the Lake and Walker Knife Safety innovation taken to the next level. AutoLAWKS™ automatically sets a pin between the locking liner and the frame. This pin acts as an additional layer of safety, so the locking liner is less likely to disengage during use.

To close the knife, pull the AutoLAWKS™ red button lever back, slide the locking liner over, and fold the blade into the closed position. All knives in this series are equipped with clip options that allow four-position carry on belts or webbing— tip up, tip down, left or right. (Caution: These knives are not designed for tip-up in-pocket carry.) They are special knives, designed by the military for special forces desert use.

M16®-14D Desert Big Dog has an aluminum frame M16 in desert camo. The contoured handles of 6061 T6 aluminum are hard anodized Desert Tan. The 3.875" (98 mm) AUS 8 stainless steel blade, chosen for edge retention and durability, receives a highly corrosion-resistant Desert Tan non-reflective titanium nitride coating. It has a Combined Razor-Sharp and Triple-Point™ Serrated edge to cut through nets, webbing and vegetation quickly.

It also features our exclusive patented* AutoLAWKS™, the Lake and Walker Knife Safety innovation taken to the next level. AutoLAWKS™ automatically sets a pin between the locking liner and the frame. This pin acts as an additional layer of safety, so the locking liner is less likely to disengage during use. To close the knife, pull the AutoLAWKS™ red button lever back, slide the locking liner over, and fold the blade into the closed position..

One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot. The dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. Please note: These knives are not designed for tip-up in-pocket carry.

M16®- 14ZER EMERGENCY RESCUE TANTO LARGE WITH TRIPLE POINT SERRATIONS

Designed by Kit Carson in Vine Grove, Kentucky

At the request of those in the emergency services field, we have modified one of our most successful designs for these rugged applications. The M16-14ZER's handles have scales of tough glass filled nylon in high-visibility orange. We have chosen tough blade steels to withstand abuse, and gave the M16-14ZER a polished finish to resist corrosion. We've added a seat belt cutter to the flipper and a tungsten carbide window breaker to the butt. Finally, we have priced it to be as affordable as possible.

Automated Liner Safety

Triple Point™ Serrations

Seat Belt Strap Cutter and Tungsten Carbide Window Breaker

It began like a Christmas wish list. What if we could build Kit Carson's M21™ series just the way a custom knifemaker would: with a G10 and stainless steel InterFrame build and a titanium nitride-coated premium stainless steel blade? What if we could bring it in at a very competitive value price? Just like a kid on Christmas morning, we got everything we wanted. And so can you. The smaller size M21-02G and M21-12G models make excellent every day carries. They're available in your choice of Razor-Sharp or our exclusive Combined Razor-Sharp and patented (1) Veff™ Serrated edge grinds.

The swedged and recurved spear point blades are made of premium 8Cr14MoV stainless steel with a non-reflective black titanium nitride finish which gives maximum corrosion resistance. There are many reasons custom knifemakers choose an InterFrame build with stainless steel liners and G10 scales in preference to aluminum or even titanium scales. First, the aggressive G10 texture gives unparalleled grip. Second, it is very strong. Third, it is lightweight. And finally, G10 is an insulator with a low specific heat. Therefore, it is cooler to grip in the beating desert sun, and warmer to grip at subfreezing temperatures.

These M21 models also feature the very popular "Carson Flipper" blade extension, which aids opening and acts as an additional blade guard. Unlike the typical custom knifemaker, we are able to engineer our patented (2) AutoLAWKS™ automatic knife safety into all M21 models. AutoLAWKS™, the Lake and Walker Knife Safety innovation taken to the next level. AutoLAWKS™ automatically sets a pin between the locking liner and the frame. This pin acts as an additional layer of safety, so the locking liner is less likely to disengage during use. To close the knife, pull the AutoLAWKS™ red button lever back, slide the locking liner over, and fold the blade into the closed position. As is standard practice on CRKT folders, lubrous washers at the blade pivot assure velvety-smooth one-hand opening and closing, using Kit Carson's trademark dual checkered thumb studs which also act as a blade stop. Every model features a removable stainless steel clothing/gear clip. All fasteners, including the clip screws, are Torx®. Liners, hardware and clip are black oxide coated.

So there you have the M21 G10 series. We call it a "premium value line." Everything you could ask for in a custom-quality work knife at a great price. Does that make us feel jolly?

Work In the Front. All Comfort in the Back.

The M21™ G10 series offers up unsurpassed cutting power featuring deep-bellied spear point blades in the front, and lightweight, insulating, tough G10 handles in the back. In the middle is you, happy, and ready to take on tasks.

Retired Master Sergeant and legendary custom knifemaker Kit Carson of Vine Grove, KY designed the M21™ series. His knives have been a long-time staple of military forces worldwide and Kit wanted to create a premium knife that was everything you could ask for in a high quality work blade, but at a great price. He succeeded with a heavy-duty knife series that's tough enough for whatever life throws your way.

Made of high carbon stainless steel blades this deep-bellied spear point-style is swedged and recurved. It's like having a bulldozer with laser-like cutting precision. A non-reflective black titanium nitride finish offers maximum corrosion resistance. So they can still look good even after the messiest of jobs. We're sure you've done a few of those.

The M21™ G10's feature the innovative AutoLAWKS™, the Lake and Walker Knife Safety innovation taken to the next level. AutoLAWKS™ automatically sets a pin between the locking liner and the frame. This pin acts as an additional layer of safety, so the locking liner is less likely to disengage during use. To close the knife, pull the AutoLAWKS™ red button lever back, slide the locking liner over, and fold the blade into the closed position.

To deploy quickly, press your finger on the Carson Flipper, the blade flies open, and this innovative safety system automatically has your back. The handle of the M21™-04G is built as tough as the blade but that doesn't mean we sacrificed comfort with it. An InterFrame build with stainless steel liners makes this baby tough and tactical. Meanwhile the G10 scales give you lightweight, unparalleled, all weather grip. The handles also keep your hands cool in the summer and warm in the winter. It's the best of all worlds in whatever corner of the planet you use it.

So grab hold of the M21™ G10. When it comes to your list of favorite features, it checks them off, with authority.