Modern classic is the knife with drop-point blade and straight sharpening. Ganzo G704 model will be enjoyed by both tourists and hunters, fishermen. High-quality alloy steel 440C (resistant to corrosion) was selected as the blade material. Its hardness is 58-60 units on Rockwell scale allowing to speak with confidence on the knife durability, its resistance to high loads and extreme conditions of use. It is essential that the knife retains sharpening for as long time and you do not need to have any special knowledge to recover the sharpness of the blade. Unfolded length of Ganzo G704 is about 20 cm. the blade is 8.6 cm. Special attention should be paid to the product handle made of G10, special composite textolite. It has a textured surface and allows to keep the knife as comfortably as possible even under adverse conditions.
With Ganzo G723 knife it is very easy to make sandwiches, open a can, clean the caught fish or to prepare small cuttings for the fire. This makes it an excellent option for outdoor use. However, practical qualities of Ganzo G723 make it possible to use in the city. So this model is recommended for all active people who want to have a quality knife “at hand.” It can be used equally easily to cut an apple or a clean wire, as well as perform many other tasks.
Ganzo G723 has a stainless steel blade. 440C steel was used for its production. It is characterized by corrosion resistance, can to stay sharpened long and has hardness of 58 units. The blade itself is 9.5 cm long; thickness of its spine is 4 mm.
The base of the handle is also made of stainless steel. On the one side of it there is a clip to fasten the knife, on the other side it is decorated with plastic strap. The surface of the strap is rough allowing tighter holding the knife in the hand. Available colors: green, orange and black. Besides, the handle of the knife has a through hole of a small diameter. A strap could be put through it for extra safety measure during work and transportation.
Characteristics:
Blade material is 440C steel;
Handle material is steel and G10 composite plastic;
Compact folding knife will be of use every time you have a nature trip. Ganzo G7413P has all qualities that make it an excellent candidate for this position. Its blade is made of one of the most popular steel brands – 440C. It is resistant to rust and other types of corrosion. Moreover, dark coating of the blade is additional protection. This coating has also a tactical value, due to it the knife does not glare in the sun. Therefore, the hunters should pay attention to Ganzo G7413P model. The blade cutting edge is completely smooth; it is a classical sharpening technique. The balde size is up to 89 mm. The knife length together with the handle is 205 mm. plastic cover plates with G10 label are bolted to the metal base of the handle. They are not completely smooth but with a small texture that does not allow the knife to slip. Since plastic is easily painted, the manufacturers offer three handle options: orange, black and green. In every options, a metal clip is attached to the knife handle and a small lanyard with a wistle.
Ganzo G7461-WD1 is a practical knife for nature trips. It can cope with campfire cooking, cans, thin shives for the fire and other tourist tasks. Hunters and fishermen will also use this knife. It can be used not only outside the city but in the city as well. The model is rather compact due to folding design. The blade length is 85 mm. It is enough to make it convenient to work with the knife. Total length in the open position is 20 cm. Good quality steel, 440C, is used for the blade. It is a stainless steel according to classification but is hard enough to keep sharp sharpening for a long time. The knife is sharpened completely smooth and the blade shape of this model is drop-point with sharp nose. The blade surface is shiny and was hot-pressed treated. Small dashed strips across the base are observed after this treatment; they indicate the treatment direction. The knife handle fits well the palm. Its shape is very discreet and accurate. Cover plates for steel base are made of organic wood. A steel clip is attached to them on one side.
The Skimen Model is the creation of Ruslan Skimen a knife repairman. This is the first knife of the Adimanti design series, embodying convenience, logic, respectability. The Ganzo brand has long been firmly entrenched in the market with a reputation as a manufacturer of inexpensive and high-quality knives.
The Skimen Model is the creation of Ruslan Skimen a knife repairman. This is the first knife of the Adimanti design series, embodying convenience, logic, respectability. The Ganzo brand has long been firmly entrenched in the market with a reputation as a manufacturer of inexpensive and high-quality knives.
Folding knives are especially convenient for tourism and Ganzo G7452 model is made in such a way as to take into account all the features of field use. Metal for this knife - stainless steel. This solid steel grade 440C (about 58HRC), which is capable for a long time to maintain a high quality sharpening. The blade has a sharp tip, characteristic forms of drop-point, and completely straight line sharpening. Carbon fiber is used for handle material. It is easily recognizable by the exclusive interlacing fibers. Carbon is comparable in strength to steel, but much lighter and it is the best for tourist knives. In addition, it is comfortable to hold, even during cold weather or after a prolonged stay of the knife in the sun. Blade length in the ready for use is 21 cm. Of these, 9 cm falls on the blade. G-Lock helps for entirely safe using of this model.
