Du har ingen varer i handlekurven.
Casström
Casström Axe Loop - Black
Lager: 2
An axe loop that allows your axe to hang from your belt, fitting most handles.
kr 195,00
Casström Axe Loop - Cognac
Lager: 3
An axe loop that allows your axe to hang from your belt, fitting most handles.
kr 235,00
Casström Belt Loop w/Bridal Hook - cognac
Lager: 2
Beskrivning Art.nr: 11525
Denna hållare fästs snabbt och enkelt på bältet med en gevärsknapp och håller fast din utrustning med en karbinhake. Gevärsknappen gör att du inte behöver öppna bältet för att ta på och av hållaren. Fungerar utmärkt till exempelvis eldstål, fällkniv, hundpejl, nycklar etc. som du snabbt vill ha tillgång till utan att det riskeras att tappas bort. Kan även komma till pass för att fästa olika saker som en lykta hängande i en trädgren, ett myggnät eller liknande. Användingsområdet är stort. Vegetabilgarvat 3 mm läder med en kraftig hållare i mässing.
Passar för bälten med bredd upp till 7 cm.
Total längd: 15 cm
Remmens bredd: 2,5 cm
Vikt: 55 g
kr 375,00
Casström Lapland Leather Wax
Lager: 10
Casström Lapland Leather Wax, är en ett wax som utvecklats och optimerats för att skydda fodral, knivslidor och hölster utan att mjuka upp lädret så de skall bibehålla sin styvhet och form. Andra läderfett, vax och oljor som finns tillgängliga på marknaden passar bäst till läderprodukter som skall mjukas upp och bibehålla sin flexibilitet såsom kängor, sadlar och handskar i läder. Dessa vanliga lädervårdsprodukter riskerar att försämra lädervaror som formats till en exakt storlek för att passa det den skall skydda, som en kniv till exempel.
Casström Lapland Leather Wax är en produkt som är tillverkad av huvudsakligen naturliga råvaror som bivax, karnaubavax och klövfett. Applicera vaxet med en bit tyg på lädret. Låt vaxet torka på lädret i ca. 30 minuter och polera sedan av ytan med en tygbit eller trasa. Efter ca 24 timmar kan läderytan efterpoleras igen för bästa resultat. Lädret har nu ett skyddande lager vax som gör ytan motståndskraftig mot smuts och fukt. Återappliceras vid behov vid men minst ett par gånger per år.
Ljust läder kan bli en aning mörkare efter användning och matt läder blir blankare.
Stäng burken ordentligt för att undvika att vaxet torkar ut.
Producerad i Sverige.
Nettovikt ca. 20g.
Innehåll: Lösningsmedel, bivax, karnaubavax, klövfett och pigment.
Klassificering enligt CLP: Ej farlig blandning.
kr 175,00
Casström No. 10 SFK 14C28N
Lager: 1
These knives are made with a handle in orange G10 - a very though material that is resistant to moisture, cracks and hard impact. The bright colour makes it easier to find a knife lost in the woods. Black liners.
This strong full-tang knife is built for versatile use during hunting, fishing and general use of the forest. It is a very sturdy knife you can skin a moose with, fillet a fish with as well as carving wood. The blade is about 10cm long and made of about 3.5 mm thick Sandvik 14C28N, a Swedish stainless steel developed for knives (58-59 HRC).
The knife is sharpened with a Full Flat grind and has a satin finish. This steel is combined with the grinding makes these knives very easy to cut with, effective for a variety of tasks and maintain an edge well, but is still very easy to sharpen. This type of grind is not optimal for batoning and prying but rather optimised for efficient cutting due to the low angle and thinness behind the edge. To increase the strength the secondary bevel needs to be sharpened back and angle increased a little, however for heavy use we would recommend you choosing a version with Scandinavian grind.
The knife comes with a very sturdy knife sheath made of 3 mm thick vegetable tanned leather. The sheath has an extra wide belt loop, a bottom opening for fluid and a hole for a leg attachment.
About the steel:
Sandvik steel knife 14C28N
Sandvik's most recently developed product in its popular series of knife steel. The optimized composition creates a steel with a unique combination of excellent edge holding features (stability, sharpenability and sharpness), high hardness and high corrosion resistance. This new version steel has the ability to be heat treated so that the wear resistance is improved over prior steel types without affecting the microstructure. To sharpen the knife is therefore relatively easy, while edge stability in terms of chipping and edge rolling is still very good.
Steel structure analysis in percent
C Si Mn P S Cr N
0.62 0.2 0.6 0,025 0.01 14.0 0.11
kr 1 995,00
Casström No. 3 Dangler- Black
Lager: 4
Casström's No.3 Dangler is an excellent accessory which lets your knife hang lower down from the waist, enabling it to move freely. This makes movement and handling on and off the belt easier and smoother. The specially designed D-ring can also be used for other purposes.
This product has been designed as a result of customers requesting an extended belt loop - a "dangler" - so that a knife can be easily accessed when you are wearing a jacket or have a large backpack on with a hip belt. The knife comes off easily without having to open your belt, you can also move the knife to your backpack if required, or just quickly remove it if you are approaching an area where knives should not be visible.
Other benefits of using a Dangler are that it is easier to sit down without the knife causing an obstruction. When the sheath hangs it will bend at the height of the hip joint which allows the knife to smoothly follow your leg movement. If you anchor it to the leg you can run, climb and bend without the knife getting in the way.
We have also designed the D-ring as a carabiner which gives the product many more features and applications.The D-ring is made of sturdy 8mm thick aluminum and tested up to a 450kg breaking load which means that you can use it for lots of different purposes, for example to hang up equipment, pull an animal or anchor a dog leash to your waist.
Note that the D-ring should not be used when climbing as falling can create forces that significantly exceed 450kg. The belt loop is made of sturdy 3mm thick vegetable tanned cowhide available in Cognac Brown or Black. The loop can take belts with a width up to 5cm. The Dangler's D-ring will take knife sheaths with a belt loop up to 34mm wide.
kr 250,00
Casström No. 3 Dangler- Black
Lager: 7
Casström's No.3 Dangler is an excellent accessory which lets your knife hang lower down from the waist, enabling it to move freely. This makes movement and handling on and off the belt easier and smoother. The specially designed D-ring can also be used for other purposes.
This product has been designed as a result of customers requesting an extended belt loop - a "dangler" - so that a knife can be easily accessed when you are wearing a jacket or have a large backpack on with a hip belt. The knife comes off easily without having to open your belt, you can also move the knife to your backpack if required, or just quickly remove it if you are approaching an area where knives should not be visible.
Other benefits of using a Dangler are that it is easier to sit down without the knife causing an obstruction. When the sheath hangs it will bend at the height of the hip joint which allows the knife to smoothly follow your leg movement. If you anchor it to the leg you can run, climb and bend without the knife getting in the way.
We have also designed the D-ring as a carabiner which gives the product many more features and applications.The D-ring is made of sturdy 8mm thick aluminum and tested up to a 450kg breaking load which means that you can use it for lots of different purposes, for example to hang up equipment, pull an animal or anchor a dog leash to your waist.
Note that the D-ring should not be used when climbing as falling can create forces that significantly exceed 450kg. The belt loop is made of sturdy 3mm thick vegetable tanned cowhide available in Cognac Brown or Black. The loop can take belts with a width up to 5cm. The Dangler's D-ring will take knife sheaths with a belt loop up to 34mm wide.
kr 250,00
Casström No. 3 Dangler- Cognac
Lager: 2
Casström's No.3 Dangler is an excellent accessory which lets your knife hang lower down from the waist, enabling it to move freely. This makes movement and handling on and off the belt easier and smoother. The specially designed D-ring can also be used for other purposes.
This product has been designed as a result of customers requesting an extended belt loop - a "dangler" - so that a knife can be easily accessed when you are wearing a jacket or have a large backpack on with a hip belt. The knife comes off easily without having to open your belt, you can also move the knife to your backpack if required, or just quickly remove it if you are approaching an area where knives should not be visible.
Other benefits of using a Dangler are that it is easier to sit down without the knife causing an obstruction. When the sheath hangs it will bend at the height of the hip joint which allows the knife to smoothly follow your leg movement. If you anchor it to the leg you can run, climb and bend without the knife getting in the way.
We have also designed the D-ring as a carabiner which gives the product many more features and applications.The D-ring is made of sturdy 8mm thick aluminum and tested up to a 450kg breaking load which means that you can use it for lots of different purposes, for example to hang up equipment, pull an animal or anchor a dog leash to your waist.
Note that the D-ring should not be used when climbing as falling can create forces that significantly exceed 450kg. The belt loop is made of sturdy 3mm thick vegetable tanned cowhide available in Cognac Brown or Black. The loop can take belts with a width up to 5cm. The Dangler's D-ring will take knife sheaths with a belt loop up to 34mm wide.
kr 250,00
Frakt
Vi sender for kr 75,- i hele Norge.
Fraktfritt ved kjøp fra kr. 1.000,-
